流化床反应器的静电与结片的消除方法

文中论述了UNIPOL流化床反应器在生产过程中产生静电的机理及危害.分析了静电及结片产生的因素,并对此提出了行之有效的预防及消除方法.     

大型水轮发电机组励磁变压器参数及绝缘方式的选择--由三峡机组励磁系统投运引起的思考

结合三峡机组励磁系统的调试及投运经验,对大型水电机组静止自励系统选型中存在的一些关键性技术课题进行分析与论证,期望得出的结论有助于在大型水轮发电机组励磁系统参数选择和在提高机组运行安全、可靠性方面提供有益的借鉴。文中提出的励磁系统设计新理念仅代表个人的观点。     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

PbZr0.52Ti0.48O3薄膜红外椭圆偏振光谱研究

用磁控溅射法在Pt/Ti/SiO2 /Si衬底上制备了PbZr0 .52 Ti0 .4 8O3(PZT)薄膜 .XRD结果表明经过退火后的PZT薄膜呈现多晶结构 .通过红外椭圆偏振光谱仪测量了λ为 2 .5～ 12 .6 μm范围内PZT薄膜的椭偏光谱 ,采用经典色散模型拟合获得PZT薄膜的红外光学常数 ,同时拟合得到未经处理的PZT薄膜和退火后PZT薄膜的厚度分别为 45 4.2nm和 45 0 .3nm .最后通过拟合计算得到结晶PZT薄膜的静态电荷值为 |q|=1.76 9± 0 .0 2 4.这说明在磁控溅射法制备的PZT薄膜中 ,电荷的转移是不完全的 .     

3-D gust effect factor for slender vertical structures

Original studies on gust factor buffeting dealt with the alongwind displacement of structures. Research on this topic carried out since the nineties followed two distinct lines: the first determines the maximum effects due to the alongwind response; the second extends the original method from the alongwind response to crosswind and torsional responses. This paper represents the junction point of these research lines with reference to cantilever slender vertical structures. It derives the most relevant effects associated with the three-dimensional (3-D) wind-excited response of this structural type and shows that a suitable definition of one non-dimensional quantity, referred to as the 3-D gust effect factor, provides such effects at any level through a wide set of experimental, numerical and analytical procedures. A new definition of a 3-D equivalent static force consistent with this method is also introduced and critically compared with previous analogous statements.     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。     

哈拉沁水库泄洪洞进水塔静动力分析

利用4—21节点块体单元对哈拉沁水库泄洪洞进水塔进行离散,分析6种工况下进水塔结构的自振特性，并通过反映谱法计算顺水向和垂直水向结构的抗震动力响应，包括结构的动位移和动应力。将动力计算结果与静力计算结果进行叠加，成果显示进水塔的变形和强度均满足要求，为工程设计提供了依据。     

Lowering the erosion wear of long blades of the last stages by optimum hanging

Problems of optimum hanging of long rotor blades of the last stages of steam turbines are considered. Causes of nonuniform erosion wear of the inlet edges connected with inaccurate location of holes for the external damper coupling on the chord of the profile are determined. Methods for optimizing the hanging of blades for raising the reliability of the last stages are suggested. Main results of hanging performed with the help of a specially developed “LIBRA” soft hardware are presented. __________ Translated from élektricheskie Stantsii, No. 11, November 2006, pp. 36–41.     

应用频率-初速法测试推算单桩承载力须解决的几个关键问题

本文对当前频率 -初速法应用中存在的一些问题阐述了作者的看法并着重探讨桩振初速度V0的计算方法、W0 的正确单位、如何使桩 -土体系明显震动、怎样从激振曲线中突出及分离出桩振曲线 ,从而获得正确的桩振频率f0 和首波峰 -峰值Ad、动静对比系数 βv 的选取